Greenoil Standard for hydraulic cranes

RMN delivery of Greenoil Standard for hydraulics

Again a shipowner has chosen for Greenoil Standard Oil filtration systems

RMN deliverd this week a Greenoil Standard WP1-B1-100 oil filtration unit for a Heavy Lift Vessel to keep the hydraulic oil of the cranes in perfect condition.  The unit is capable to filter 100-120 liter of hydraulic oil per hour. The clearness of the oil that Greenoil can achieve is NAS2 (which can be used for airospace and robotic industry). Not only the harmfull particles are removed but also water will be removed out of the oil down to 30 ppm.

Greenoil is the only manufacturer in the world capable with its patent unique water separator to remove free, dissolved and bound water out of the oil without damaging the oil. 

For the crew their is also a big benefit in compare with other filter units that they can exchange the filter insert without the use of tools, oil spill or physical contact with the oil. The filter exchange takes place in only a few minutes and everyone on board is capable to do this.

Suction height is 6 meter and filtered oil flows back into the tank by gravity. In case that it is not possible to install the unit above the tank, Greenoil Standard offeres a range of units with a double pump where one pump is the suction pump and the other pump is the return pump.

Installation is fast and easy by using standard hydraulic hoses with couplings or steel pipes. Connections at both sides (suction and return) are standard male BSP.

A pressure gauge at the unit shows when the filter insert has to be exchanged. Optional an Alarm system and a Local/Remote Start/Stop panel are available.

Greenoil Standard for high performance oil filtration of hydraulic oil – transmission oil – engine lubrication oil and MDO gasoil.

Contact us for more information.